5.2 Brake disc replacement

Working process:

1. Based on part 5.1, take off the pad and then take off the air chamber, disassemble brake assembly from the axle;
2. Take off the hub and disc according to operation manual provided by the axle factory;
3. Assemble the hub and disc according to the manual after replacing the disc;
4. Adjust ABS sensor according to the manual provided by axle factory;
5. Assemble the brake, pad and air chamber according to the requirement.

Caution:

1. Before assembling the disc, the oil stain and other corrosion inhibitors on surface should be removed.